Translate

Showing posts with label mold. Show all posts
Showing posts with label mold. Show all posts

Saturday, August 8, 2015

Mold revisited. How to remediate black mold.


I wrote here about mold in homes in an earlier post; however I don’t think I spent much time on how to remediate it.

Let’s start by establishing that almost all homes have some mold of some sort and that most of it isn’t the dreaded black mold.  Mildew is the most common type of fungal growth in most homes and is as close cousin to the molds that are actually harmful. Mildew is a surface fungus, while true mold will penetrate into the surface of the things that it is growing upon. Mildew is easily handled with common household cleaners, but mold takes a bit more effort and if left untreated for any length of time may require replacement of the wood or drywall that is growing upon. All molds require a source of moisture and something to eat. While we don’t consider our drywall walls to be all that taste, mold loves the stuff and will happily grown on any drywall surface, as well as wood , wallpaper and anything else that it can digest.

So what should you do if you see a patch of mold in your house? You can try to tackle it yourself or you can call in a professional. Since you aren’t an expert on mold types, if it’s anything besides the common mildew it’s probably a good idea to get a professional opinion, rather than panic and move out to a hotel because you think your house is overrun by black mold. There are many types of mold, in a variety of colors and with a variety of different hazard levels in terms of human health. I think it’s safe to say that almost any mold may cause some human reaction, depending upon one allergies and general health.

Recently I received an email from Trica Hall, a representative of the Web Site BlackMoldRemoval.com – a site run by a mold remediation company, that contained the following  Infographic about black mold and how to remediate it - http://www.blackmoldremoval.com/removal/. Take the time to browse through that site.

Having dealt with mold issues in many homes that I’ve either sold or for which I represented the buyers,  I can tell you that it is an issue that should not cause panic, just like the3 presence of Radon should not cause panic. Both of those issue are easily remediated and usually at a reasonable cost. There are much bigger and more costly problems that one can find in a house than either of those – foundation issues come to mind.


One thing that I think does deserve some thought is whether to try a DIY remediation if mold is found. A tiny patch in the basement by the laundry is one thing; however extensive mold groth due to flooding is quite another. If you read through the Infographic you’ll notice that the pros come in equipped in Hazmat suits; they bring big HEPA filter with them and large air drying equipment. They also have professional grade sanitizing chemicals to kill off the mold. What are you standing there with – a roll of paper towels and a spray can of Scrubbing Bubbles? That may work for mildew, but not for real mold. And what about your breathing safety equipment? Pulling your T-shirt up over your nose isn’t going to cut it when dealing with mold. If you truly have mold, especially black mold, leave it to the professional to remediate.  For more on black mold and how to find a professionals to deal with it, go to  http://www.blackmoldremoval.com/.  If it’s extensive black mold this is probably not a DIY job.

Monday, March 16, 2015

What’s that white stuff on my lawn?

The snow has finally melted in our area and my lawn has this whitish/grey stuff that looks like cotton
candy on it. What’s that?

Well, as you might have guessed, it is not cotton candy; it’s a a disease - mold that is growing in your lawn. It’s called snow mold and it’s very common in the northern tier of states and in Canada. Below is a little about it from Wikipedia –

Snow mold is a type of fungus and a turf disease that damages or kills grass after snow melts, typically in late winter.[1] Its damage is usually concentrated in circles three to twelve inches in diameter, although yards may have many of these circles, sometimes to the point at which it becomes hard to differentiate between different circles. Snow mold comes in two varieties: pink or gray.
Gray snow mold (Typhula spp. or Typhula blight) is the less damaging form of snow mold. While its damage may appear widespread, it typically does little damage to the grass itself, only to the blades.[1] Unlike most plant pathogens, it is able to survive throughout hot summer months as sclerotia under the ground or in plant debris.[3] Typhula blight is commonly found in United States in the Great Lakes region and anywhere with cold winter temperatures and persistent snow fall.[4][5]
References:
1.  "Snow Mold Fact Sheet". University of Rhode Island Landscape Horticulture Program. Retrieved 2012-10-07
2. "RPD No. 404 - Snow Molds of Turfgrasses". Univ. of Illinois Extension. July 1997. Retrieved November 11, 2011.
3. Ash, Cynthia (February 2000). "SNOW MOLDS in LAWNS". University of Minnesota. Retrieved 2012-10-07.
4. Kerns, J.P. (2011). "Turf diseases of the Great Lakes region". Univ. of Wisconsin Extension. Retrieved November 11, 2011.
5. Johnston, William H. (December 2003). "Snow Mold Control in the Intermountain Northwest". U.S. Golf Association. Retrieved November 10, 2011.

I live in Michigan and get grey snow mold in my yard every spring (the picture above was taken in my front yard). Apparently it isn’t really all that harmful to the grass, but perhaps I could do a better job of raking the lawn before the first big snowfall to get it ready for winter. The grey splotches in your lawn now will disappear as the weather warms and certainly be chopped away with the first mowing of the lawn. The mold doesn’t go away, it just goes dormant and remains underground until next winter’s snows.

If you would like to read about alternatives to control snow mold in your lawn, here is a link to an article from the University of Massachusetts that discusses several fungicides that you might use.  Apparently, since the banning of Mercury-based fungicides, there has not been a single fungicide that can effectively control all of the various strains of snow mold, especially the pink type.  

Snow mold is just one of the molds that can infest lawns and you are likely to see most of the other types over the course of a summer, either in your yard or as neighbor’s lawn. Some of the molds are not associated with the grass, but may be growing on the roots of trees, especially trees that were cut down but the roots left to rot. Guess what eats those roots? That’s right – molds.


 So, the bottom line is that you should not necessarily be overly alarmed by the snow mold; but, perhaps take some action this summer and fall to treat your lawn, so that it does not return next year. You won’t see it all summer, but it is still there, underground, just waiting for that first big snow to start growing again. You may still get “fairy rings” and mushroom s popping up from time to time in your lawn and those are forms of molds too, but that’s a different story and usually less harmful to the lawn.

Thursday, December 5, 2013

Mold - Not a laughing matter, but not a show stopper either

Recently one of the cartoon strips that runs in the local paper had a series of days were they ran cartoons about the travails of a character that they portrayed as a Realtor®. The Realtor had made a sale and was accompanying the home buyer and their home inspector during the home inspection.  In what was supposed to be humorous (and was), a panel showed the inspector shining his flashlight towards a corner and you saw his comment – “What’s that over in the corner, a moldy piece of cheese?”  From out of the panel you also saw the reaction of the buyer – “Mold! Eeeck! I’m out of here. The sale’s off.”

The extreme reaction to the work “mold” was supposed to be funny and I thought it was at the time; although, I could relate to actual experiences that were almost as extreme. I once accompanied the buyers and their inspector on a home inspection of a house that I represented, because their agent couldn’t be there. Two and a half hours into the inspection, with the buyers present the entire time, the inspector removed a dropped ceiling panel in the basement and discovered some discoloration on the floor joist beams of the first floor that he said were mold. As soon as he said the word mold the buyers’ wife started having an asthma attack and had to leave the house. She had been fine until that point and had been in the basement for quite some time. Just the mention of mold set her off.

The mold that we found in that house was later determined to be a very common type that most likely developed as the wood was awaiting use when the house was built. It had long ago dried up and gone dormant. The home owner paid to have it remediated but those particular buyers walked away from the deal. The presence of mold can have that kind of effect on people. You can read all about mold, the various types and the health hazards by just Googling “mold”; however, I caution you to read enough so that you don’t get just the view of a few panicky people. There are a lot of “may cause”, “could cause” and “may be linked to” statements about potential health hazards. There is also lots and lots of advice on how to deal with mold in your home.

Now, I certainly don’t want to suggest that mold is not an issue to be concerned about. Some mold types are more likely than others to cause health problems and many people have heard about the dreaded black mold, which is a big health issue. The truth is that black mold is very rare, but less toxic or non-toxic molds, like mildew, are very common and can be found in most homes. We can actually blame the efficiency of some of the modern building techniques, which have resulted in very “tight” homes – homes that don’t leak air and that are well insulated. That very tightness also means that air can’t circulate in many of these homes, so any source of dampness can linger and provide one of the necessary ingredients for mold to grow. The other is a source of food for the mold – wood is a favorite source.

One of the sources of moisture that I see most often is the improperly vented bathroom exhaust fan. Too many Do-It-Yourselfers try to install their own bathroom fans and just vent the thing right into the attic space above the bath. That dumps all of the moist bathroom air that results from baths or showers right up into the nice wooden attic space. Mold in the attic is the result. The other thing that I see a lot is more disturbing, because the people who make these mistakes are supposed to professionals and should not let this happen. That is, improper attic ventilation. Roofers who don’t install enough roof venting or soffit venting are usually to blame; however, insulation contractors sometimes do sloppy work and just blow insulation right over the soffit vent opening in the attic. They are supposed to install baffles to allow the soffit air to get to the attic. Make sure that you discuss proper attic ventilation with any contractors that you hire to do roofing or insulation work and have them explain what they are going to do to insure that ventilation.

The other usual suspect for a location of mold in many homes is in the basement. If the basement has concrete block walls, rather than the poured concrete walls that have been fairly standard for 30 years or more, it will usually show some evidence of effervescence, which is water seeping slowly through the pours in the concrete blocks. Where that happens it is not unusual to see mold, either on the blocks or somewhere near. There are special paints to seal the blocks and prevent the water intrusion. Basement laundry areas should also be watched for signs of any mold growth. Of course bathrooms, with tubs and showers provide great places for mildew and mold and have to be constantly kept cleaned.

When buying a home, whether it is new build or a re-sale home, a good home inspection should be done and any issues, including mold, should be dealt with in negotiations with the seller. Mold, like Radon or other environmental or health issues, can be effective remediated and the house made completely healthy.  Most mold remediation companies also provides guarantees that mold will not return in that same area for some period of time, usually between 5 – 10 years.  You may get mold elsewhere in the house, but not there.

It is important to note that depending upon the size of the remediation job it can cost from a few hundred to many thousands of dollars to fix a mold problem. That is not an easy cost for many sellers to swallow, especially if the price has already been negotiated down. The sellers may ask that the buyers split the cost of the remediation with them. There is some logic in that request, since it is the buyer who will get to enjoy the mold-free house for many years. That is between the buyers and sellers. So if you find a piece of moldy cheese under the refrigerator, just throw it out and don’t panic. The bottom line is that finding mold in a house does not need to be a show stopper, just something to be dealt with as a part of the transaction.

Wednesday, December 12, 2007

Bats in the belfry and mold in the attic


I did an inspection today on one of the foreclosed houses that I seem preordained to make bids upon. There weren't any bats, but if there had been they would likely have been sick puppies. To no ones great surprise, there was mold in the attic -not just a little, lots! This house, like so many 70's homes was built with inadequate roof ventilation and that was further exacerbated by the owner (or some helpful insulation contractor) when they insluated right out to the edges of the attic, thus covering and blocking the eves vents from doing their job. So, no circulation, combined with poorly placed can vents and you get mold.

Likely this isn't the dreaded "toxic black mold" that everyone is so afraid of but we took a sample for the lab to test, just to be sure. There were other issues with the house, most just really maintenance things, but a couple more of serious enough nature to require some action. There are almost always going to be issues in a foreclosed house, some of them liely to be serious, due to the neglect that the house has gone through.

The game now becomes one of "what will the bank do?" A few months back banks might have been willing to make the necessary repairs. These days they are not so inclined and many aren't even ofering any compensation to the buyers to fix it themselves. Some say it's because they have already dumped the prices and can't afford to loose any more on the place. Some say they just don't care any more - take it or leave it. Of course getting them to say anythng at all can be the challenge. I've had one request in for over 2 weeks now, with no feedback at all from the bank. See yesterday's post - Waiting for Godot and the banks. It's all so surreal. So this great buy of a house is now maybe a little less of a deal.